Wireless Module compatible with Jetson Nano with 2.4G/5G Hz Support

AC8265 Wireless NIC Module compatible with Jetson Nano(B01) Onboard Intel 2.4G / 5G Hz Dual Band WiFi Bluetoot Wireless-AC8265 is a dual mode wireless NIC module applicable compatible with Jetson Nano Kit. Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. Chip: Intel 8265AC ; Bands: 2.4GHz / 5GHz;Speed: 300Mbps / 867Mbps WiFi protocol: 802.11ac ;Bluetooth version: 4.2; NIC interface: NGFF (M.2);Antenna interface: IPEX connector Supported OS: Linux, Windows 10/8.1/8/7 ;Dimensions: 22mm x 30mm x 2.4mm C8265 Wireless NIC, 2.4G / 5G WiFi, Bluetooth 4.2, Applicable compatible with Jetson Nano This is a dual mode wireless NIC module applicable compatible with Jetson Nano, supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. How to Use: 1.Remove the two screws on Jetson Nano,detach the Jetson Nano 2.Connect the extension cable to Wireless-AC8265 on IPEX connector , tighten the nut and washer to each SMA connector 3.Remove the NIC screw onboard, insert the Wireless-AC8265 into the M.2 socket , screw it tightly 4. Insert the Jetson Nano into the socket and screw it again , connect the antennas Note:This item does not support Jetson Nano 2GB Kit Colour:black+green Material:PCB Package Contents: 1 x Wireless-AC8265 NIC Module 2 x Antenna 2 x IPEX to SMA cable Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.