説明
1、Suitable for all kinds of small and medium-sized alternator
2、A device for regulating the output voltage of analternator based on the principle of PWM controlled DC excitation combined with some generator characteristics.
3、Can be used for PMG, harmonics, and full harmonics. Generators that are excited by auxiliary windings, line power supplies, etc.
4、High stability, fast response, easy installation and maintenance, etc.
5、Can adjust the generator output voltage with low frequency protection setting
1 x Automatic Voltage Regulator
Item Type: Automatic Voltage RegulatorThe Normal Use Environment:Ambient Temperature: -20℃ -60℃Altitude: <1000MRelative Humidity: <90%Technical Parameters: Signal Voltage (AC):Terminal V0-V220 Input 180-250VAC: 50/60HzTerminal V0-V380 Input 370-450VAC, 50/60HzOutput (DC): Maximum continuous 6A, 90VDC (220VAC input)Maximum Output Current (DC): up to 12A, 10 secondsExcitation Winding Resistance: Minimum 8ΩVoltage Input (AC): 180~250VAC, 45-60 Hz.Voltage Adjustment Range: 180-250 Vac: 370-480VacPressure Regulation Accuracy: <±
0.5% (when engine variation is less than 4%)Voltage Drift: <
0.05%/°CResponse Time: <1 cycleBuilt Voltage: AVR input voltage is greater than 8Vac, 35HzParallel CT: rated current ratio 1 common current transformerWiring:
1. V0-V220, V0-V380 voltage measurement input.
2. E+, E-excitation output.
3. X1-X2 power input terminal, this power supply can be PMG, full harmonic, auxiliary winding, line power supply, etc.
4. S1-S2 current compensation input, using current transformer secondary side current is 1A.
5. VR1-VR2 remote voltage regulation, connected to 1KΩ/1W adjustable resistor. First adjust the adjustable resistor to about the midpoint and connect it to VR1 and VR
2. Then adjust the AVR voltage to adjust the potentiometer to the voltage to be adjusted. The adjustable resistor can adjust the output voltage by ±20V.
6. A1-A2 accepts an external DC voltage source to control the generator output voltage, and is connected to a voltage source of ±1V. With TRIN potentiometer, the adjustment range is -20--+20VAdjustment Settings:
1. OTLT: generator output voltage adjustment, CW adjustment of output voltage drop, CCW rise
2. STAB: The generator voltage stability is adjusted, and the stability is strengthened, and CCW is weakened.
3. UFRO: low frequency protection setting, CW frequency decreases, CCW frequency increases
4. DIP: V/Hz reduction ratio adjustment during low frequency protection, CW decrease, CCW increase.
5. DROOP: Current compensation component adjustment, CW reduction, CCW increase.
6. TRIM: Analog voltage input component adjustment, CW reduction, CCW increase. This potentiometer is on the front left corner of the AVR.
-
Fruugo ID:
355021829-771850565
-
EAN:
9153118816863
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
安全上の警告:
WARNING: Opening and/or repairing your device may result in risk of electric shock, damage to the device, fire and personal injury, and other hazards. We recommend that you seek professional assistance for device repairs and exercise caution when repairing your device yourself.