Innovative microporous polymer pore oleophobic layer It absorbs filaments at the molecular level, provides strong adhesion, and can exert the full bonding effect without heating, effectively preventing printing failures caused by the first layer falling off, and significantly reducing the energy consumption of hot bed heating. High hardness and high magnetic spring steel plate Effectively limit stress warping to that the edges of the steel plate not deform or warp when large printed parts cool and shrink. Stable attachment, no heating required No need to heat, strong adhesion can be achieved at room temperature, and there is no need to worry about warping. No need to cool down to remove the board The side handle allows for one-handed removal of the mold. After printing, you can remove the plate directly without waiting for it to cool, greatly optimizing the printing process. AR positioning code accurate identification Satisfy the printer's hot bed positioning function, and assist the slicing software to accurately identify the type of steel plate.No need to worry about printer scanning errors on the hot bed. (The product printed words depending on the batch, but this does not affect use) Color: As Shown Material: Steel Plate Package Contents: 1 * 256x256mm Cool Build Plate Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.