Minimalist design, easy to install. Compatible with other HAT shield, FFC is only 30mm length Supports installation of official active coolers. With M.2 SSD ACT LED Indicators Supports 2230/2242/2260/2280 NVME M2 ssd Can Power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Integrated with XH2.54 5V power connector, just use it if you are using a ultra large capacity SSD if the current is not enough. The X1001 shield is a NVME M2 SSD PIP (PCIe Peripheral Board) for 5 that uses the PCIE interface of the for 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting. Model:X1001 PS:If you find that the SSD is not working properly, it is possible that the power supply of SSD is not enough, then you need to check the current requirement of your SSD to decide whether power the SSD separately. Note:Due to different production batches, product appearance/batch/color may be different, which does not affect use. Colour:Black Material:PCB Package Contents: 1 * adapter board 1 * PCIe FFC cable 3 * studs 6 * M2.5x5mm screws 1 * M2x4mm screw Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.