Dual Band Wireless Network Adapter WiFi Adapter for Xbox 360 Features: 1. This Network adapter is special for Xbox 360 game console. 2. Provides wireless network connection for your game console. 3. Connects USB interface on the host for power and communication. 4. Uses 2.4GHz and 5GHz dual-frequency signal. 5. Uses 802.11a/b/g wireless civil network protocols. 6. Integrated wireless network technology will not conflict with your wireless controller. Setting Method: 1. Start up your host and any wireless network device. 2. Install your adapter on the panel behind the host, connect the USB connector. 3. Enter the system page of the host menu interface and set network parameters. 4. Establish a direct wireless connection with another host that also has an adapter installed. 5. After setting the page without error, the host will establish a connection with the existing wireless network. 6. Insert two protruding springs on the adapter into two small slots near the USB interface on the rear panel of the host. 7. Insert the USB connector of the adapter into the USB port on the rear panel of the host. If the host network cable port is connected with a network cable, you need to unplug it. 8. Stand up the antenna of the adapter. The antenna can only rotate in one plane, do not try to twist. Specification: Material: ABS Suitable: for XBOX Size: 95 * 45 * 15mm / 3.7 * 1.8 * 0.6in Weight: Approx. 62g Package List: 1 * Network Adapter