Summary OEM - 100% Genuine Microsoft Part - Like New. Taken out of faulty/damaged Xbox one units. DOES NOT COME with the UK PLUG power lead. Not suitable for XBOX ONE S or ONE X The adaptor cable is approximately 1.1 meters (3 feet, 6 inches) long. CE approvedDescription OEM - 100% Genuine Microsoft Part - Like New. Taken out of faulty/damaged Xbox one unit. DOES NOT COME with the UK PLUG power lead. Input: 200-240V Output: 12V - 16.5A CE approved Model no: A12-220P1A Part no: X863373-005 The adaptor cable is approximately 1.1 meters (3 feet, 6 inches) long.Important Info The PSU fan automatically starts when you press the power button to start your console. Typically, the fan makes a "whirring" noise. When your console is in energy-saving mode, or when it's disconnected from the PSU, the fan doesn't operate. If your console is in Instant-On power mode, the PSU is still on and the fan will spin. The speed of the fan increases or decreases when the temperature of the PSU changes. If the fan speed changes, the "whirring" noise that the fan produces increases or decreases. To help the power supply operate efficiently and safely, follow these precautions: Don't block any ventilation openings on the PSU. Don't put the PSU on a bed, a sofa or any other soft surface that might block the ventilation openings. Don't put the PSU in a confined space, such as a bookcase, a rack or a stereo cabinet, unless that space is well-ventilated. Don't put the PSU near any heat source, such as a radiator, a heat register, an oven or an amplifier. Don't stack other electronic devices on top of the PSU. Make sure that the PSU is positioned horizontally and lays flat on the four rubber pads on its base. Not suitable for XBOX ONE S or ONE XWhat's in the Box? Microsoft Xbox One Power Supply Unit Only