3.5mm Stereo with Locking Nut - This plug nut adopts a movable design and can be moved up and down. The advantage is that it can be used with both the locking socket and the standard 3.5mm socket. The 3.5mm plug is a nut plug, which has a locking function compared to ordinary plugs. When connected to the input interface of some wireless microphone transmitters with threaded 3.5mm interfaces, the plug can be locked on the device without falling or loosening. The plug shell is copper, black paint, and the plug connector is copper gold-plated contact point The 3Pin XLR female shell is made of thickened zinc alloy casting and black paint. The connector is made of copper and gold, and the tail and the connection line contact part are made of soft rubber sheath, which effectively protects the wire and does not scratch the wire skin. The wire is a 4.5mm double-shielded 24awg connection wire, and the outer layer is a braided protective net. The connection method is a balanced connection method, which is compatible with 48v power supply.<br><br>Product use: Widely used in the connection of mixers, microphones, wireless transmitters, receivers, and other equipment. The 3.5mm plug adopts a threaded locking function, which is very suitable for connecting the microphone to a wireless microphone receiver with a threaded locking input interface. Even if the hand shakes violently during the performance, the plug is not easy to fall off or loosen. Colour:Black Material:Woven Mesh+ Metals Size:300CM<br><br>Package Contents: 1x Microphone Cable<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.