Item Type: Z Axes Touch Tool Setter <br>Tool Setting Speed: 50-200mm/Min <br>Environmental Temperature: 0℃-80℃ <br>Voltage: DC 0-24V <br>Current: Below 20mA<br>1、Better Control: The output switch signal is received by the CNC system and then programmed to perform tool length setting, tool wear detection, and tool breakage detection. <br>2、Great in Safety: Under no vibration malfunction, the thermal deformation of the machine can be corrected according to the rated voltage, current, and specified speed. <br>3、High Accuracy: The sharpness angle of the tool directly contacts the tool tip related to the machining size, and measures its position, size, and output signal with high accuracy. <br>4、Stable Working: Adopting a dustproof and waterproof structure, it has good durability under conditions of coolant and iron filings flying. <br>5、Good Stability: No need for built in amplifier, no deviation caused by temperature and power voltage fluctuations in the part where the tool is located.1 x <br> <br>Z Axes Touch Tool Setter<p>1 x Accessory</p>