["Description:\nbrand new and high quality\nFeature:\nUsed for filling the for gap between the heat source and heat sink device. Its outstanding performance on the CPU GPU LED will meet your high standard demand for cooling system.\nProduct features: for Accord with RoHS and REACH environmental for protection requirements. High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.\nWorking principle: Filling the for gap between heating element and the cooling device; Increasing the contact area so as to achieve the soundest thermal conductivity effect.\nMethod of use: It's normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).\nWarm notice: Keep children away from it. If it is swallowed or inadvertently come into eyes, ear, nose, mouth,please flush with clean water or send to hospital when necessary.\nStorage: Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity.\n\nSpecifications:\nModel:ZF-12\nColor: As shown\nThermal Conductivity: 12W/m-k\nThermal Resistance: 0.003k/for w\nOperating Temperature: -160°c -280°c\nContent: 1.5g\nQuantity:1Pc\n\nNote:\n1.Transition: 1cm=10mm=0.39inch\n2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\n3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage includes:\n1Pc x ZF-12+scraper\n(other accessories demo in the picture are not included)"]