Please check the following before using this device: 1. Your smartphone or tablet is connected to a 2.4 GHz Wi-Fi network with internet access (5 GHz Wi-Fi is not supported). 2. Ensure Bluetooth is enabled on your phone. 3. For Android devices, the operating system must be version 4.0 or higher. 4. Download and install the Tuya Smart app from the official app store. 5. If your wireless router uses MAC address filtering, disable it via the router’s admin interface. 6. This device requires a compatible Zigbee gateway to operate. Product Instructions: 1. Search for “Tuya Smart” in the Apple App Store or Google Play Store and download the app. 2. If prompted for permissions during installation, select “Allow.” 3. Register an account and log in to the Tuya Smart app. 4. Follow the included instruction manual for correct wiring. Do not install or wire the device while powered on. 5. After completing the wiring, power on the device. By default, incoming call notifications are disabled. You can enable or customize this setting within the app. Specifications: Input Voltage: DC 5V / 85–250V AC Maximum Load: 2200W / 10A Wireless Standard: 2.4 GHz IEEE 802.11b/g Operating Temperature: –20°C to 70°C Product Dimensions: 81 × 76 × 28 mm Color: White Material: ABS Package Includes: 1 × Smart Switch Note: Color may vary slightly due to screen settings and lighting conditions. Measurement tolerance: ±1–3 cm.