Measuring and cutting bevel angles usually requires two separate tools and cannot be done in one go. And transferring the correct measured angle to the saw is both tedious and error-prone. In Zitour®2-in-1 for measuring bottle cutting toolsMeasuring and sawing precise bevelsIt isA practical and efficient product that guarantees youA perfect fit to your slatNo need for an angled bevel! Main Features▶2 in 1 Performance ToolBoth Miter Angle Can Be MeasuredAnd Finished Cuts, Eliminating the Need for Multiple Tools, And To Avoid Mistakes When Transferring the Correct Angle to the Saw. ▶Accurate Measurement2 Movable Angles Measuring ArmsFrom 85 to 180 ° It can be used directly to measure all angles within this range. ▶Precision CutsZ Integrated Guide Pin for the Saw, The bar is placed on the provided guide plateA sawing is carried out by Rear sawPrecise and error-free bevel cutting. ▶Practical measuring + cutting toolZitour®Used to solve the problemCutting corners in slats or recessesWhere special measuring tools are required, forPiping installation, DIY, carpentry work. Suitable for skirting board up to 30mm wide. SpecificationsProduct weight287GRought size(L. XWxH)310×85×65MMBouing ContentZitour®2-in-1 Bevel Cutting Tool × 1MaterialABS+PC+Stainless SteelNoteDue to manual measurement, please allow slight deviations for measurement.